Multi-laminates Laminated MDF Board Making Machine for Interior Furniture Application with 50,000cbm/year Capacity
1. Laminated MDF Introduction
Facing MDF board, also known as decorative medium-density fiberboard. It is made from high-quality MDF as the base material. On its surface and/or backside, through processes such as high-temperature and high-pressure, cold pressing, or vacuum thermoforming, a decorative and functional facing material is adhered to form the final product.
Application of Laminated MDF Panel:
Full-house customization and panel furniture: This is its largest application market.
Panel: Side panels, layer boards and back panels of wardrobes, cabinets and bookcases (usually covered with melamine veneer).
Door panels: Flat panels for cabinets and wardrobes, decorative doors (mostly made of PVC/PET thermoforming or covered).
Surfaces: Desk tops, bathroom countertop surfaces (often paired with wear-resistant fireproof boards or thick-edge designs).
Interior doors and door frames: They are usually made by milling MDF, then applying PVC film or wood veneer to create richly shaped paintless interior doors.
Commercial spaces and display items: store shelves, exhibition stands, counters, hotel furniture, etc., must be durable and attractive.
Wall decoration system: Used as wall panels or background walls, it enables quick installation and achieves a unified visual effect.
Specialty field: Laboratory furniture countertops (must be covered with fire-resistant boards), school furniture, audio box bodies, etc.
2. Laminated MDF Production Process
How to make the Laminted MDF board from raw materials? What equipment required to make it?
For making the Laminated MDF board, it mainly through these steps:
>>> Raw materials prepare
Raw materials: Mainly fast-growing wood (such as pine and eucalyptus) or forestry residues (such as branches and offcuts) are used.
Chipping: Wood is processed into uniform-sized wood chips through a chipping machine.
Cleaning and screening: Remove impurities such as sand, stones and metals from the wood chips, and sort them by size to ensure uniform cooking in the subsequent process.
>>> Fiber Production -Defibrator
Steaming: The wood chips are sent into the steaming tank and softened with high-pressure saturated steam.
Thermal grinding separation: The softened wood chips are ground into wood fibers in a thermal grinder. This is a key step in the production of medium density fiberboard (MDB), and the quality of the fibers directly affects the strength of the board.
Gluing and Additives: During or after the thermal grinding process, adhesives such as urea-formaldehyde resin (UF) or melamine-modified urea-formaldehyde resin (MUF), as well as paraffin (waterproofing agent), curing agents, etc., are precisely and evenly sprayed onto the fibers. This is a decisive step in determining the environmental protection grade of MDB (such as E0, E1 grades).
>>> Mat Forming & Pre-press
Laying: The fibers that have been applied with adhesive are evenly laid out on a conveyor belt into a continuous "fiber blanket" by means of an air flow or mechanical laying machine. This determines the density distribution and thickness uniformity of the board.
Pre-pressing: The fluffy fiber blanket passes through a pre-pressing machine and is initially compressed into a board blank with a certain strength, facilitating transportation.
>>> Hot Press & Cooling
Press: Under high temperature (approximately 180 - 220ºC) and high pressure, the slab is compressed to the desired thickness. At the same time, the internal adhesive rapidly cures, firmly bonding the wood fibers together to form a sturdy sheet.
Cooling: Cooling: The freshly rolled plates have a very high temperature and need to be placed in the cooling rack for cooling to stabilize the internal stress.
>>> Edge Cutting & Sanding
Trimming: As the required final size, trimming the four edges of panel
Sanding: Through rough sanding and find sanding the panel surface and thickness, make the final panel with balance thickness and smooth surface, ensure the panel with high quality.
>>> Laminating
Laminating the Melamine paper or natural veneer as your production technique, by the short cycle fast hot press machine, to laminating the paper on both sides of the MDF quickly.
3. Specification of the MDF line
| Panel size |
1220*2440mm |
| Thickness |
3-30mm |
| Production capacity |
50,000 cbm/year |
| Glue type |
UF, MUF |
| Vibrating screen |
with 2 layers sieve mesh |
| Defibrator |
Capacity 6ton/h |
| Forming width |
1400mm |
| Hot press |
18 layers
equipped with auto loader and unloader |
| Sanding machine |
2 sanding heads + 4 sanding heads |
4. MINGHUNG Machine in Clients Plant
5. Why Choose Us?
Except offer the "Suitable & Strong" Machine for you, we also insist use "Good and famous" spare parts, and the most important is that we can be your reliable suppliers in China
We are Shandong MINGHUNG OSB&MDF Machinery Equipment Manufacturing Co.,Ltd
One professional plant and manufacturer of Wood based panel machinery, mainly include MDF line, OSB production line, Particle board production line, and Plywood production line.
Choose a Reliable, Good, Sincerity Supplier, you no need worry anything. You will get a good woodworking machine, and quickly and good service.
We believe we are qualified to be your Chinese partner.
Audited Supplier 
){kind=link}