Automatic MDF Production Machine Mat Forming and Hot Pressing Machine

Product Description

Automatic MDF Production Machine Mat Forming and Hot Pressing Machine

 

MDF Forming machine

MDF(Medium density board) laying machine is the key equipment in the density board production line, which is used to evenly lay the dry wood fibers into slabs for the subsequent hot press forming. Its main function is to ensure a uniform distribution of fibers, thus guaranteeing a consistent density and thickness of the final product
MDF is widely used in Furniture production, Construction, Decoration and so on
 

 

MDF Hot Pressing

Medium density board (MDF) hot press is the key equipment for the production of MDF board, through the hot press process to combine wood fiber and glue to form high-density, high-strength board

Hot press composition:
- Hot press plate: Provide high temperature and high pressure environment to ensure the forming of MDF plate.
- Hydraulic system: provides pressure to ensure uniform plate pressure.
- Heating system: provides heat energy to promote glue curing.
- Control system: Automatic control of hot pressing process to ensure accurate process parameters.
- Conveyor system: Automatically transport MDF plate in and out of the hot press.

Equipment features:
- Efficient production: Automatic operation, improve production efficiency.
- High precision control: Precise control of temperature, pressure and time to ensure quality.
- Versatility: Suitable for MDF plate production of different thicknesses and densities.
- Energy Saving and Environmental Protection: Optimize energy utilization and reduce emissions.

 

MDF board introduction

MDF is a kind of artificial board made of wood fiber, by breaking down wood into fibers, adding resin binder, and then pressing through high pressure

Application:
1. Furniture production: MDF is widely used in making cabinet, bookshelf, table and bedframe
2. Interiour decoration: used for wallboard, ceiling, door and so on
3. Building trades: used for floor base, partition. template
4. Artware: suitable for carvings, models and decoration
5. Audio equipment: used for sound, musical instruments

Advantages:
1. Smooth surface: easy to paint, laminate, suitable for fine processing.
2. Uniform structure: uniform density, uniform strength, not easy to deform.
3. Good workability: easy to cut, drill and carve, suitable for complex design.
4. Environmental conservation: it can use wood waste, reduce waste of resources
5. Low cost: compare with wood, the price is more competitive

 

 

MDF production step

How to make MDF? 
It mainly include below production steps:

1. Raw material handling section
- Chipper: Cut wood or other plant raw materials into small pieces for easy follow-up treatment.
- Cleaning machine: Remove impurities in wood chips, such as soil, stones, etc.
- Screening machine: Screen wood chips of uniform size to ensure the quality of subsequent processing.

2. Fiber preparation section
- Hot mill: The wood chips are heated and ground into fibers, while adding a resin adhesive.
- Dryer: Remove the moisture in the fiber and make it reach the appropriate humidity.

3. Molding section
- Laying machine: The dry fibers are evenly laid into slabs.
- Prepress: The slab is initially compressed, the air is discharged, and the preliminary molding is made.

4. Hot press section
- Hot press: The slab is pressed into a density plate under high temperature and pressure to achieve the required density and thickness.
- Cooling machine: cooling the hot pressed sheet to stabilize its shape and performance.

5. Post-processing section
- Sanding machine: Sanding the surface of the plate to make it smooth and flat.
- Edge cutting machine: cut the edge of the sheet according to the specification, so that it meets the size requirements.
- Sorting machine: According to the quality of the plate classification, to ensure consistent product quality.

6. Packing section
- Stacker: Stacking finished sheets neatly.
- Packaging machine: Packaging the stacked plates for easy transportation and storage.

7. Auxiliary system
- Dust removal system: Collect the dust generated in the production process to keep the workshop clean.
- Thermal energy system: Provides the heat energy required in the production process, such as steam, hot oil, etc.
- Control system: Automatic control system to monitor and regulate the parameters in the production process.
 

Our Factory Advantages

We have been focus on this industry many years, with advanced and mature production technology, High precision processing equipment, Professional design and technology team, and Strictly quality control management system, to keep upgrade our wood based panel machinery
We mainly can offer the complete line of MDF making machine, OSB making machine and Chipboard making machine.


 

For more information. welcome contact us, we will quickly reply